8 BNC Antenna ports
bibchip gen2
Bibchip the original, now also available in UHF
The newest addition to the mandigo product family, the bibchip gen2 system, is a small lightweight system that is incredibly versatile. If you are in the market for a system that offers optimal performance with a core set of built-in features, the bibchip is the right choice for you.
bibchip gen2 system
The bibchip taggy is the central control unit, to which 8 floor antennas will be connected over. It saves the data transmitted by the transponders together with the corresponding time. This data can be read out at any time on the different interfaces. The taggy is the backbone of all our timekeeping units. The data collected provides the basis for improved services to the marathon runner: before, during and after the event.

Technical data taggy:
8 BNC antenna ports, Weight: 8kg
Protection Class: IP 53;
Operating Voltage: 85-264 VAC, 60W, 47-63 Hz;
Battery: 11-15 VDC, 50W

Power redundancy:
If your line current is broke, the system switches automatically to the battery.
Time and system setup.
You can setup up your satellite time, your daytime, your start time or your gun time.

Operating RFID Frequencie:
UHF 868 – 956 MHz
Operating temperature
-10°C up to 50°C

Data backup:
For reasons of data protection the Taggy features two slots for a PCMCIA Flash disk with FAT File System. An embedded control unite always store all detected data.

Live data export:
Reading and exporting time of a single data file is down to 20 ms

GPRS and Ethernet interface:
Integrated GPRS connection. Live IP upload to the trackmyrace.com result server.

bibchip gen2 floor antenna:
The UHF floor antennas are integrated in an standard cable channel.
Width:    28 cm
Height:     3,5 cm
Weight: 5 kg
In Line: 8 x 1 meter in a row.
Redundancy: 2 lines a 4 x 1 meter
 
 
bibchip gate finish
bibchip
The technology

Intelligent solutions for the perfect sports event: bibchip – the tried and tested complete timing system for races
 
Fast feet and a strong physical condition are the ideal prerequisites to run a marathon. An event is perfect when suppliers, federations and promoters make the organisation as secure and cost-effective as possible: bibchip is the tried and tested complete timing system with transponder technology for races.

Tried and tested technology
All required data are stored on the bibchip and given to every runner integrated into their A5 size start number. Now, at the start and finish, the athletes don’t have to ensure their signal transmitter is in the right place. The information on the back of the start number is read without the need for physical contact of a radio antenna. The actual advantage is the high accuracy of identification as the runners start, interim, and finish times are definitely captured immediately.
 
Automatically faster
In this way, the bibchip can be used as a timing system in popular sports. In any race, straight after finishing, the first thing a runner wants to know is his/her timing and placing – which he/she can check with the help of the taggy controller, an integrated functionality of the bibchip system by mandigo. The software accompanying the system processes the times obtained in the systems control centre and controls any further processing.
 
Endless possibilities
The most varied possibilities present themselves for the use of the data recorded: real time notices of interim times, live data for the Internet or TV up to one-to-one marketing. The data collected provides the basis for improved services to the marathon runner: before, during and after the event. The marathon application by mandigo is much more than a simple timer: the bibchip paves the way for genuine one-to-one marketing.


3er Long Range Gate
bibchip Long Range Gate
bibchip System
Bibchip aerials LRG serve sending and receive of energy and data. On the one hand, the energy with which in the field located bibchip are supplied is radiated by the aerials, on the other hand the information sent out by the transponders will conceive of the aerials.
control unit
The Taggy is the central control unit, to which different antennas will be connected over a Power-Splitter. It saves the data transmitted by the transponders together with the corresponding time. This data can be read out at any time on the different interfaces.
Power Splitter:
The Power-Splitter distributes the output power of the Taggy to the connected antennas and di-rects the signals received by the antenna back to the Taggy. Furthermore the Power-Splitter con-tains a pow¬er measuring device, which shows in a display the power emitted by the Taggy and reflected by the antennas. The reflected power enables an evaluation of the adjustment of the an-tennas, defective cables or not connected plugs.
PCMCIA-Flashdisk:
For reasons of data protection the Taggy features two slots for a PCMCIA Flashdisk with FAT File System.
Technical Data:
Weight: 40 kg
Size: 94 x 40 x 30 cm
[Protection class IP 53 with closed lid and existing seals on the plugs]
Operating voltage
Main supply: 85-264VAC, 60W, 47-63Hz
Battery: 11-15VDC, 50W
Operating time at battery supply:
The operating time depends on the capacity, the state of charge and the type of the bat tery used. The time might shorten extremely with increa- sing age of the battery.
Operating temperature: -10°C to 40°C
Output power: 8W
Frequency: 13,56MHz
Power-Splitter:
3 Antenna Powersplitter
4 Antenna Powersplitter
Weight: 3,5 - 4,0 Kg
Size: 20 x 30 x 11 cm
Frequency range: 13MHz to 14MHz
Power: 2W to 10W
Antennas:
Size: 180 x 106 x 7 cm
Weight: 17 kg
Frequency range: 13,56MHz
Power: bis 4W
Tuning-Controller:
Weight: 0,5 k
Size: 22 x 11 x 4 cm
Operating frequency: 9V Battery, e.g. Duracell
© mandigo KontaktImpressum